When something goes wrong with the plumbing in a Port Washington home, the first question is usually whether it can wait. A slow drain or a dripping faucet might feel like it can. A pipe that has frozen overnight, a water heater that stopped heating, or a main line that is backing up into the lowest fixtures in the house cannot. We handle both kinds of call, and we handle them the same way: scope the job on the phone, give you a price before anything is scheduled, and get to work.
Port Washington is a town where most of the housing stock sits on full basements, and the plumbing inside those houses reflects that. Older supply lines, cast iron drain stacks, and decades of hard water deposits are common. We work on all of it. We cover Port Washington and Ozaukee County for the full range of residential plumbing repair and installation, from a single fixture swap to a whole-house repipe.
Call (414) 451-9789 and we will get it on the calendar.
Repiping is not a decision most people make lightly, but there is usually a point where patching stops making sense. A pinhole leak in one spot is a repair. Pinhole leaks appearing in three different spots over the same winter are a sign the pipe material itself is failing. Galvanized steel pipe, which is common in older homes across this part of Wisconsin, corrodes from the inside out. The first sign is often reduced pressure at every faucet in the house, not a visible leak.
When repiping comes up, the conversation starts on the phone. We walk through what the supply system looks like, where the main runs, and what the scope of the job actually involves room by room. For most homes, the work is staged so that a section of the house keeps water at all times. That means living through a repipe is manageable, not a week without running water.
The pipe material matters too. Copper and PEX each have real trade-offs depending on the property and the budget, and we explain both before any decision is made. We tell you if a permit is needed. We explain repair or replace. You make the choice.
Some plumbing work in Wisconsin requires a permit before it starts, and some does not. The line between the two depends on the municipality and the scope of the job. Replacing a faucet or clearing a drain is straightforward. Installing a new water heater, repiping supply lines, or modifying drain and vent stacks are the kinds of jobs that typically trigger a permit requirement and an inspection afterward.
The inspection is not a complication. It is how the work gets signed off as code-compliant, which matters if you ever sell the house or file an insurance claim. We confirm what applies at your address before anything starts. Code-compliant plumbing on every job is the baseline, not an add-on. Let us handle the plumbing and the permits.
A plumbing visit starts before any tools come out. The first thing that happens is a conversation about what you have seen, when it started, and what has changed. That shapes where we look first. For a leak, that might mean checking water pressure, inspecting supply lines, and using pressure testing to narrow down the source before anything is opened up.
Nothing is agreed to until you know what was found and what the repair involves. The price is confirmed before work starts. If the job turns out to be more involved than the phone conversation suggested, we explain what changed and what it means before continuing. Fixtures and lines are left working before we go.
A toilet that runs between flushes is usually a fill valve or flapper that is no longer seating correctly. It does not feel urgent, but a toilet that runs constantly can add a meaningful amount to a water bill over weeks. A toilet that is actively leaking at the base is a different problem. That water is going somewhere, and it is usually into the subfloor. Both are worth a call sooner rather than later.
When a toilet rocks or shifts, the wax ring underneath it has failed. Water from every flush is seeping somewhere it should not. Reseating the toilet means pulling it, replacing the ring and any damaged hardware, and resetting it properly. Full replacement follows the same process with a new fixture at the end of it.
A tankless unit heats water on demand rather than keeping a tank at temperature around the clock. The installation involves confirming the gas line or electrical supply can handle the unit's demand, routing the new venting, and connecting the supply and hot water lines. It is a bigger scope than swapping one tank for another, and the phone conversation covers what the job involves before anything is scheduled.
A water stain on a ceiling, a soft spot in a floor, or a water bill that has climbed without explanation are all signs of a leak that is not visible from the surface. We use pressure testing and electronic detection methods to locate the source without opening up more wall or floor than necessary. Once the source is confirmed, the repair is scoped and priced before anything is touched.
Outdoor supply lines and hose bibs that are not properly winterized before the cold sets in are among the most common sources of burst pipe calls in the spring. A frost-free hose bib drains itself when the handle is turned off, but it only works correctly if the line behind it is not blocked or improperly installed. We check, repair, and replace outdoor faucets and the supply lines behind them, and we confirm that seasonal shutoff valves are draining completely.
A dripping faucet is almost always a worn cartridge, seat, or washer inside the valve body. Ignoring it costs water and eventually damages the fixture. A faucet that has seized and will not turn is a different problem, usually corrosion or mineral buildup on the valve stem. Both are repair calls that take less time than most people expect, and both are worth handling before the faucet fails completely.
Don't let a small leak turn into a flooded floor, and do not wait days for an appointment when the problem is getting worse. We take calls every day from 9 AM to 10 PM, and we handle short-notice work as part of what we do. For urgent situations, including burst pipes, sewer backups, and water heaters that have stopped working, the same number reaches us and the same process applies.
For properties with tenants or businesses that cannot close for a day, we work around the schedule on the call. That means coordinating access, confirming what needs to stay in service, and staging the work so the disruption is as short as possible. With a local shop, your questions go straight to the people doing the work. You get a real answer about what is available, not a window that stretches across three days.
Plumbing pricing depends on what the job actually involves, and that is not always clear from the surface. A drain that is slow at one fixture is a different job from a main line that is backing up throughout the house. A faucet that drips is a different job from a supply line that has been leaking inside a wall for a month.
When you call, we ask about what you are seeing and scope the work on the phone. For most repairs, that conversation is enough to give you a clear rate before anything is scheduled. For larger jobs, the final price is confirmed in person once the full scope is clear. What changes a quote is what the fault turns out to be and what has to come apart to reach it. You know both before work starts. Everything covered is listed on the page covering our plumbing services.
Call (414) 451-9789 to get a price on any plumbing repair or installation in Port Washington.
We serve Port Washington and the surrounding communities throughout Ozaukee County. If you are nearby, we can confirm coverage when you call.
Communities we cover regularly include:
Homes built on full basements in this part of Ozaukee County often have cast iron drain stacks, galvanized supply lines, and floor drains that have not been used in decades. Cast iron holds up well but eventually cracks or corrodes at the joints. Galvanized supply lines narrow from the inside as corrosion builds up, which shows up first as reduced pressure at every fixture rather than a visible leak. A floor drain that has dried out can also let sewer gas into the basement. These are the kinds of things we look at when a repair call turns into a broader conversation about what the system actually needs.
Yes. A drip that seems minor can waste a significant amount of water over weeks, and a fitting or valve that is weeping is usually on its way to failing further. Addressing it while it is small is almost always less work and less cost than waiting until it becomes a larger problem.
Water in the Lake Michigan watershed and the areas around it tends to run hard, which means mineral deposits build up inside supply lines, water heater tanks, and faucet cartridges over time. Scale inside a water heater reduces efficiency and shortens the life of the unit. On fixtures and valves, the buildup can seize a cartridge or restrict flow at the aerator. These are not emergency calls, but they come up more often in this region than in areas with naturally softer water, and they are worth addressing before the restriction becomes a failure.
Usually, yes. A clog that clears without any intervention has typically shifted rather than been removed. The material that caused it is still in the line somewhere downstream, and the same spot will collect debris again. Having the line cleared properly gets the obstruction out rather than just moving it.
Yes. If a repair points to a habit or a condition that is likely to cause the same problem again, we explain it. That might be what goes into a garbage disposal, how a drain trap dries out in an infrequently used bathroom, or what a recurring clog usually means about the line.
Calls about properties in smaller communities within the area we cover are answered here. Call with the address and we will confirm coverage before anything is scheduled.
Call (414) 451-9789 and describe the additional job.
Whether it can be added to an existing visit depends on the schedule and the location. We confirm what is possible on the call rather than making a commitment we cannot keep.
We protect your home. We fix your pipes. We earn the call.
Reach us at (414) 451-9789 any day between 9 AM and 10 PM.
There are no forms to fill out and no waiting for a callback. Call and the conversation starts right away.
We are close by in: Saukville, Grafton, Thiensville.
View our full town list.
We handle the full range of plumbing work for homes and commercial properties across Port Washington and the surrounding area. Whether you are dealing with a slow drain, a failing water heater, or a pipe that froze overnight, the table below covers what each service includes and what to expect when you call. Pricing is explained before anything is scheduled, and every job is held to code from start to finish.
| Service | What's Included | When to Call | Helpful to Know |
|---|---|---|---|
| Sewer & Main Line Service | Clog clearing and line flushingCamera inspection of the lineCracked or collapsed section repairFull main line replacement | Sewer backups, slow drains throughout the house, or odor from multiple fixtures | We camera the line when the situation calls for it so we know what we are dealing with before any digging starts. This is sewer line work, not septic tank service. |
| Water Heater Repair & Replacement | Tank and tankless unitsSediment flush and element repairFull unit replacement with sizingGas and water line connections | No hot water, inconsistent temperature, or a tank past its useful life | Replacement units are sized to the household's actual demand before anything is ordered, so you are not paying for capacity you do not need. |
| Drain Cleaning & Clog Removal | Cable and hydro-jet clearingKitchen, bath, and main line drainsRoot intrusion and buildup removalCamera scoping when needed | Recurring slow drains or full backups in any fixture | Hydro jetting clears the pipe wall, not just the center of the line, which helps prevent the same clog from returning. |
Call (414) 451-9789 to get a price on any of the services above, every day from 9 AM to 10 PM.
(414) 451-9789